Publications

Anjum, S.K.; Wolff, C.: Integration of Agile Methods in Automotive Software Development Processes. In: Proceedings of the 3rd International IEEE Conference AND workshop in Óbuda (CANDO) on Electrical and Power Engineering (EPE), Budapest, Hungary, 2020

Bazzal, M.; Krawczyk, L.; Prasath Govindarajan, R.; Wolff, C.: Timing Analysis of Car-to-Car Communication Systems Using Real-Time Calculus: A Case Study. In: Proceedings of the 5th IEEE International Symposium on Smart and Wireless Systems within the International Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS SWS 2020), Dortmund, Germany, 2020

Bleja, J.; Langer, H.; Grossmann, U.; Mörz E.: Smart Cities for Everyone – Age and Gender as Potential Exclusion Factors. In: IEEE European Technology and Engineering Management Summit (E-TEMS), Dortmund, Germany, doi: 10.1109/E-TEMS46250.2020.9111741, 2020

Bleja, J.; Langer, H.; Grossmann, U.; Mörz E.: Ambient Assisted Living - an Integral Part of Future Smart Cities. In: IEEE European Technology and Engineering Management Summit (E-TEMS), Dortmund, Germany, doi: 10.1109/E-TEMS46250.2020.9111728, 2020 

Bleja, J.; Wiewelhove, D.; Krueger, T.; Grossmann, U.: User Acceptance and Evaluation of Ambient Assisted Living Systems. In: Gerontechnology, 19(0), 1-1, doi: 10.4017/gt.2020.19.s.70125, 2020

Bleja, J.; Wiewelhove, D.; Großmann, U.: Potenziale und rechtliche Einschränkungen bei der Nutzung von Daten im Bereich Ambient Assisted Living. In: GMDS & CEN-IBS 2020, Berlin, 06.-09.09.2020, in print.

Bleja, J.; Wiewelhove, D.; Grossmann, U.: Collaborative Business Model Structures for Wireless Ambient Assisted Living Systems, In: Proceedings of the 5th IEEE International Symposium on Wireless Systems within the Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS), Dortmund, Germany, 2020

Camacho, M.E.: Overview and Assessment of E-Learning Ecosystems in Higher Education: Standards, Strengths, Weaknesses, and Recommendations for an Enhanced E-Learning Experience. In: Proceedings of the Dortmund International Research Conference 2020, ISBN 978-3-948228-01-9, Dortmund, Germany, 2020

Dyan, Y.; Mikhridinova, N.: Dortmund International (Interactive) Research Conference: Feedback on New Formats from Partners of Core and Extended Network of the EuroPIM consortium. In: Proceedings of the Dortmund International Research Conference 2020, ISBN 978-3-948228-01-9, Dortmund, Germany, 2020

Fonseca, H.C.L.; Schulz, P.: Actuator Simulation for HIL Test Environment. In: Proceedings of the Dortmund International Research Conference 2020, ISBN 978-3-948228-01-9, Dortmund, Germany, 2020

Fruhner, D.; Klingebiel, K.; Wagenitz, A.; Toth, M.: Efficient Product Representations for automotive Demand and Capacity Management. In: Proceedings of the 8th International Conference on Information, Logistics & Supply Chain (ILS 2020), Texas, USA, 2020

Grosche, A.; Igel, B.; Spinczyk, O.: Transformation- and Pattern-based State Machine Mining from Embedded C Code. In: ICSOFT 2020 - 15th International Conference on Software Technologies, ACM SIGSOFT Online Streaming (Covid 19 based), 7.-9. July 2020 - https://www.insticc.org/node/TechnicalProgram/icsoft/2020/presentationDetails/97698, 2020

Gutscher, A.; Huethorst, L.; Selter, C.; Schlösser, C.; Kienle, A.; Walter, D.: FALEDIA – Fallbasierte, digitale Lernplattform zur Steigerung der Diagnosekompetenz. In: Beiträge zum Mathematikunterricht 2020 (H.-S. Siller, W. Weigel und J. F. Wörler, Hrsg.), S. 377–380. Münster: WTM-Verlag, 2020

Heisig, P.; Sachweh, S.: Towards a Model-driven Testing Approach for Microservice Architectures in the Automotive Domain. In: International Conference on Microservices 2020, Bologna, Italy, 2020

Helmich-Blümel, J.; Mikhridinova, N.: Dortmund IRC: ‘I’ Stands for ‘InterActive’. Behind the Online Scenes. In: Proceedings of the Dortmund International Research Conference 2020, ISBN 978-3-948228-01-9, Dortmund, Germany, 2020

Heß, D.; Röhrig, C.: Robust and Precise Localization of Mobile Robots using Finite Impulse Response Estimation for Fusing Odometry with Position Measurements. In: Proceedings of the 52th International Symposium on Robotics (ISR 2020). Online event. December 2020, S. 37-43, 2020

Jahn, U.; Stampa, M.; Sutorma, A.; Willich, F.; Thiem, J.; Röhrig, C.; Wolff, C.: A Recommendation for a Systems Engineering Process and System Architecture for UAS. In: Proceedings of the 3rd International IEEE Conference AND workshop in Óbuda (CANDO) on Electrical and Power Engineering (EPE), Budapest, Hungary, 2020

Jahn, U.; Heß, D.; Stampa, M.; Sutorma, A.; Röhrig, C.; Schulz, P.; Wolff, C.: A Taxonomy for Mobile Robots: Types, Applications, Capabilities, Implementations, Requirements, and Challenges. In: Robotics 2020, 9, 109; doi:10.3390/robotics9040109, 2020

Jimenez Agurto, K.; Nuseibah, A.: Exploring Your Transformative Future: Adaptive Culture, Creating Change and Operation Excellence. In: Proceedings of the Dortmund International Research Conference 2020, ISBN 978-3-948228-01-9, Dortmund, Germany, 2020

Kneer, F.; Kamsties, E.; Schmid, K.: Environment Modeling for Adaptive Systems: A Systematic Literature Review. CoRRabs/2011.07892, 2020

Köhler, P.; Röske, N.; Schmelter, S.; Fühner, C.: Using a COTS Smartphone to Control an Autonomous Self-Driving Platform. In: Proceedings of the IEEE 5th IEEE International Symposium on Smart and Wireless Systems within the International Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS SWS 2020), S. 1-6, Dortmund, Germany, 2020

Linnemann, M., Priebe, K.-P., Heim, A., Wolff, C., Vrabec, J.: Experimental investigation of a cascaded organic Rankine cycle plant for the utilization of waste heat at high and low temperature levels. In: Energy Conversion and Management, 205, 112381. https://doi.org/10.1016/j.enconman.2019.112381, Elsevier, 2020

Lokeshwara, S., Chengappa, N., Poovaiah, C., Kolte, S., Krawczyk, L.: Performance Effective Task Scheduling With Duplication. In: Proceedings of the 5th IEEE International Symposium on Smart and Wireless Systems within the International Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS SWS 2020), Dortmund, Germany, 2020

Michel, R.; Wohlgemuth, A.; Kamsties, E.: Auf dem Weg zur Anforderung 4.0 - Bestimmung der Anforderungsqualität. In: Softwaretechnik-Trends, Band 40 (1) ISSN 0720-8928, 2020

Mikhridinova, N.; Sastoque Pinilla, E.L.; Bengfort, S.; Wolff, C.; López de Lacalle, N.; Toledo Gandarias, N.: Building Cooperation between Innovation Clusters Based on Competences Requirements. Case of CFAA and ruhrvalley. In: Proceedings of the 3rd International Conference on Research and Education in Project Management – REPM 2020 (J.R. Otegi, N. Toledo and I. Taboada, Eds.) Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO), http://dspace.aeipro.com/xmlui/handle/123456789/2415, ISBN-13: 978-84-09-19740-8, Bilbao, Spain, 2020

Mörz, E.; Wiewelhove, D.; Bleja, J.; Grossmann, U.: Competitor Analysis for Identification of Potentials for innovative Care Platforms. In: Proceedings of the Dortmund International Research Conference 2020, ISBN 978-3-948228-01-9, Dortmund, Germany, 2020

Ngereja, B.; Hussein, B.; Jørgensen Hafseld, K.H.; Wolff, C.: A Retrospective Analysis of the Role of Soft Factors in Digitalization Projects: Based on a Case Study in a Public Health Organization in Trondheim-Norway. In: IEEE European Technology & Engineering Management Summit (E-TEMS 2020), Dortmund, Germany, 2020

Rademacher, F.; Sachweh, S.; Zündorf, A.: Deriving Microservice Code from Underspecified Domain Models Using DevOps-Enabled Modeling Languages and Model Transformations. In: 46th Euromicro Conference on Software Engineering and Advanced Applications, Portorož, Slovenia, 2020

Rademacher, F.; Sachweh, S.; Zündorf, A.: A Modeling Method for Systematic Architecture Reconstruction of Microservice-Based Software Systems. In: 25th International Conference on Exploring Modeling Methods for Systems Analysis and Development, Grenoble, France, 2020

Röhrig, C.; Heß, D.: Mobile Manipulation for Human-Robot Collaboration in Intralogistics. In: IAENG Transactions on Engineering Sciences - Special Issue for the International Association of Engineers Conferences 2019, S. 1-20. World Scientific. doi:10.1142/9789811215094_0001

Sastoque Pinilla, E.L.; Bengfort, S.; Mikhridinova, N.; López de Lacalle, N.; Wolff, C., Toledo Gandarias, N.: Patterns for International Cooperation between Innovation Clusters. Cases of CFAA and ruhrvalley. In: IEEE European Technology & Engineering Management Summit (E-TEMS 2020), Dortmund, Germany, 2020

Schmelter, S.; Fühner, C.; Röhrig, C.: Container Filling Level Estimation using Vibration Resonance Behavior. In: Proceedings of the IEEE 5th IEEE International Symposium on Smart and Wireless Systems within the International Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS SWS 2020), doi:10.1109/IDAACS-SWS50031.2020.9297051, Dortmund, Germany, 2020

Schulz, P.; Sleibi, N.; Tendyra, P.; Aldaghamin, A.; Wolff, C.: Cloud Connectivity of a Distributed Cyber Physical Test System. In: IEEE 6th World Forum on Internet of Things, New Orleans, Louisiana, USA, 2020

Sorgalla, J.: Microservice Development: Exploring the Unknown. In. International Conference on Microservices 2020, Bologna, Italy, 2020

Sorgalla, J.; Sachweh, S.; Rademacher, F.; Zündorf, A.: Modeling Microservice Architecture: a Comparative Experiment Towards the Effectiveness of Two Approaches. In: 35th Annual ACM Symposium on Applied Computing, Brno, Czech Republic, 2020

Sorgalla, J.; Sachweh, S.; Zündorf, A.: Exploring the Microservice Development Process in Small and Medium-Sized Organizations. In: 21st International Conference on Product-Focused Software Process Improvement, Turin, Italy, 2020

Sorgalla, J.; Sprenger, N.; Schierbaum, B.: Event-driven Monitoring of Business Processes in Microservice Architecture. In: International Conference on Microservices 2020, Bologna, Italy, 2020

Stampa, M.; Sutorma, A.; Jahn, U.; Willich, F.; Pratzler-Wanczura, S.; Thiem, J.; Röhrig, C.; Wolff, C.: A Scenario for a Multi-UAV Mapping and Surveillance System in Emergency Response Applications. In: Proceedings of the IEEE 5th IEEE International Symposium on Smart and Wireless Systems within the International Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS SWS 2020), doi:10.1109/IDAACS-SWS50031.2020.9297053, Dortmund, Germany, 2020

Stein, M.; Becker, M.; Pelkmann, D.; Rüsing, L.; Wutzkowsky, J.; Böckmann, B.: Interoperabilität von Aktensystemen – Verknüpfung einer Patienten- mit einer Leistungserbringergeführten intersektoralen Akte. In: In: GMDS & CEN-IBS 2020, Berlin, 06.-09.09.2020 

Tabunshchyk, G.; Arras, P.; Wolff, C.: Development of Cross-Domain Competences for Work 4.0. In: Proceedings of the 23rd International Conference on Interactive Collaborative Learning (ICL2020), Tallinn, Estonia, 2020

Wiecher, C.: A Feature-oriented Approach: From Usage Scenarios to Automated System of Systems Validation in the Automotive Domain. In: ACM/IEEE 23rd International Conference on Model Driven Engineering Languages and Systems (MODELS ’20 Companion), Canada, 2020

Wiecher, C.; Japs, S.; Kaiser, L.; Greenyer, J.; Dumitrescu, R.; Wolff, C.: Scenarios in the Loop: Integrated Requirements Analysis and Automotive System Validation. In: Modeling in Automotive System and Software Engineering Workshop - Co-located with ACM/IEEE 23rd International Conference on Model Driven Engineering Languages and Systems, Canada, 2020

Wolff, C.; Syzdykov, R.; Salykova, L.; Kozhakhmet, K.: Digitalized and Projectized Education at Astana IT University. In: Proceedings of the 3rd International Conference on Research and Education in Project Management – REPM 2020 (J.R. Otegi, N. Toledo and I. Taboada, Eds.) Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO), http://dspace.aeipro.com/xmlui/handle/123456789/2415, ISBN-13: 978-84-09-19740-8, Bilbao, Spain, 2020

Wolff, C.; Verenych, O., Kevorkova, S.: Digital Transformation Time: Research Results for Ukrainian Community. In: Proceedings of the 1st International Workshop IT Project Management (ITPM 2020), pp. 46-57, Lviv, Ukraine, 2020

Aldaghamin, A.; Nuseibah, A.: Gamification of Software Development Projects: A Six-Step Approach to Add Value to Businesses. In: Proceedings of the 2nd International Conference on Research and Education in Project Management – REPM 2019 (J. R. Otegi, N. Toledo and I. Taboada, Eds.) Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO), Bilbao, Spain, 2019

Badasian, A.: International Cooperation at the University Level. Obstacles and Challenges for Incoming Students and How to Eliminate Them. In: 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Metz, France, 2019

Bleja, J.; Großmann, U.; Horster, B.; Roß, A.; Löhrke, E.; Röhrig, C.; Oelker, J.; Celik, A.; Hormann, R.: IoT-Systems of the AAL-Sector: Application, Business Model, Data Privacy. In: Dependable IoT for Human and Industry: Modeling, Architecting, Implementation (V. Kharchenko, A. Kor and A. Rucinski, Eds.) The River Publishers Series in Information Science and Technology, River Publishers, ISBN: 978-87-7022-014-9, 2019

Bleja, J.; Langer, H.; Großmann, U.: Ambient Assisted Living (AAL): Einsparungspotenziale für Kommunen und Kassen? Vorschläge zu alternativen Finanzierungsansätzen. In: 11. Jahrestagung der Deutschen Gesellschaft für Gesundheitsökonomie e. V. (dggö), p. 101, 2019

Bleja, J.; Langer, H.; Großmann, U.: Kosteneinsparungen durch altersgerechte Assistenzsysteme? Vorschläge zu alternativen Finanzierungsansätzen. In: 11. Jahrestagung der Deutschen Gesellschaft für Gesundheitsökonomie e. V. (dggö), 2019

Bleja, J.; Langer H.; von Haxthausen, M.; Großmann, U.: Über die Notwendigkeit der Einbindung von Senior*innen in den Entwicklungsprozess von altersgerechten Assistenzsystemen - Eine empirische Annäherung. In: 2. Tagung des DGGG-Fachausschusses Alter und Technik, 5./6. Juni 2019, Siegen, in Druck, 2019

Bleja, J.: Ökonomische Herausforderungen kollaborativer Geschäftsmodelle für AAL-Technologien, In: 2. Tagung des DGGG-Fachausschusses Alter und Technik, Arbeitstagung: Interdisziplinäre Perspektiven auf Technikforschung, -gestaltung und -aneignung, Workshop: Evaluation innovativer Assistenzsysteme im Kontext von Alter und Technik, 5./6. Juni 2019, Siegen, in Druck, 2019

Bleja, J.; Langer, H.; Großmann, U.: Technikgestütztes Wohnen nur für Jüngere? Eine empirische Befragung Dortmunder Senior_innen. In: 10. Kongress der European Nursing Informatics 2019 (ENI 2019), S. 5, 2019

Bleja, J.; Langer, H.; Großmann, U.: Ergebnisse einer empirischen Untersuchung zur patientenzentrierten Entwicklung technischer Assistenzsysteme. In: Deutsche Gesellschaft für Medizinische Informatik, Biometrie und Epidemiologie, 64. Jahrestagung der Deutschen Gesellschaft für Medizinische Informatik, Biometrie und Epidemiologie e.V. (GMDS), Dortmund, 08.-11.09.2019, Düsseldorf: German Medical Science GMS Publishing House, doi: 10.3205/19gmds033, 2019

Bleja, J.; Langer, H.; Großmann, U.: Business Models for Wireless AAL-Systems – Financing Strategies. In: Proceedings of the 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS): Technology and Applications, 18- 21 September, 2019, Metz, France, 2019

Brünker, F.; Deitelhoff, F.; Mirbabaie, M.: Collective Identity Formation on Instagram – Investigating the Social Movement Fridays for Future. In: Proceedings of the 30th Australasian Conference on Information Systems (ACIS), Fremantle, Australia, 2019

Deitelhoff, F.; Harrer, A.; Kienle, A.: An Intuitive Visualization for Rapid Data Analysis - Using the DNA Metaphor for Eye Movement Patterns. In: Proceedings of the 2019 ACM Symposium on Eye Tracking Research and Applications. Denver, Colorado, USA: ACM, 2019

Deitelhoff, F.; Harrer, A.; Kienle, A.: The Influence of Different AOI Models in Source Code Comprehension Analysis. In: Proceedings of the 6th International Workshop on Eye Movements in Programming - EMIP ’19, 2019

Diedrich, K.; Klingebiel, K.: Smart Risk Analytics Design for Proactive Early Warning. In: Artificial Intelligence and Digital Transformation in Supply Chain Management. Innovative Approaches for Supply Chains (W. Kersten, T. Blecker und C. M. Ringle, Hg.) Proceedings of the Hamburg International Conference of Logistics (HICL), 27, Berlin: epubli, S. 561 – 587, 2019

Dyan, Y.; Mikhridinova, N.: Blended Learning in the Context of Project Management: Foreign Language Competence Acquisition. In: Proceedings of the Dortmund International Research Conference 2019 (C. Wolff and C. Reimann, Eds.) ISBN 978-3-00-063847-3, Dortmund, 2019

Ebberg, F.; Mikhridinova, N.: Managing Stakeholder Expectations Concerning the Digital Transformation. In: XVI International Conference in “Project management for the Development of Society”, pp. 20-21, Kiev, Ukraine, 2019

Fruhner, D.; Klingebiel, K.: Developing an Efficient and Flexible Data Model that Depicts Logistics-Relevant Information of Digitized Cars, DART-Symposium, November 29, Dortmund, Germany, 2019

Heisig, P.; Jeroschewski, S. E.; Kristan, J.; Höttger, R.; Banijamali, A.; Sachweh, S.: Bridging the Gap between SUMO & Kuksa: Using A Traffic Simulator for Testing Cloud-based Connected Vehicle Services, Simulation of Urban MObility (SUMO) User Conference, Berlin-Adlershof, Germany, 2019

Heisig, P.; Sorgalla, J.; Steghöfer, J. P.; Brink, C.; Sachweh, S.: A generic traceability metamodel for enabling unified end-to-end traceability in software product lines, 34th Annual ACM/SIGAPP Symposium On Applied Computing, Limassol, Cyprus, 2019

Höttger, R.: Driving the Future Connected Vehicle with Eclipse Kuksa, Presentation along with the Eclipse IoT Days, Grenoble, France, 2019.

Höttger, R.; Igel, B.; Spinczyk, O.: Constrained Software Distribution for Automotive Systems. In: 25th International Conference on Information and Software Technologies (ICIST), Springer Int. Publishing, Vilnius, Lithuania, 2019

Höttger, R.; Ki, J.; Bao Bui, T.; Igel, B.; Spinczyk, O.: CPU-GPU Response Time and Mapping Analysis for High-Performance Automotive Systems. In: Workshop on Analysis Tools and Methodologies for Embedded and Real-time Systems (WATERS) of the 31st Euromicro Conference on Real-Time Systems (ECRTS’19), Stuttgart, Germany, 2019

Höttger, R.; Krawczyk, L.; Igel, B.; Spinczyk, O.: Memory Mapping Analysis for Automotive Systems, Brief presentation track proceedings of the 25th IEEE Real-Time and Embedded Technology and Applications Symposium (RTAS), Montreal, Canada, 2019

Hussein, B.; Mallcotta, A.; Mikhridinova, N.: Lessons learned from developing and applying self-assessment instruments for evaluating project management competences in two large organizations. In: CENTERIS - International Conference on ENTERprise Information Systems / ProjMAN - International Conference on Project MANagement / HCist - International Conference on Health and Social Care Information Systems and Technologies, Tunisia, 2019

Hussein, B., Wolff, C., Mikhridinova, N.: Evaluating the Impact of Involving Students in Producing Learning Aids in Project Management. The Animation Project. In: 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Metz, France, 2019

Jahn, U.; Poliakov, V.; Gardi, M.; Schulz, P.; Wolff, C.: Introducing pulseAT: A Tool for Analyzing System Utilization in Distributed Systems. In: The 19th International Conference on Parallel and Distributed Computing, Application and Technologies (PDCAT’19), Gold Coast, Australia, 2019

Jahn, U.; Wolff, C.; Schulz, P.: Concepts of a Modular System Architecture for Distributed Robotic Systems. In: Computers, 8, 25; doi:10.3390, 2019

Jimenez Agurto, K. S.; Nuseibah, A.: Managing the Digital Transformation: Assessment of Key Capabilities Used to Drive the Digital Transformation of Well-Established Organizations. In: Proceedings of the Dortmund International Research Conference 2019 (C. Wolff and C. Reimann, Eds.) ISBN 978-3-00-063847-3, Dortmund, 2019

Kamsties, E.; Horkoff, J.: Special section: Extended papers from REFSQ 2018. In: Information & Software Technology 110: 1-2, 2019

Kamsties, E.; Wohlgemuth, A.; Michel, R.: Auf dem Weg zur Anforderung 4.0 - Bestimmung der Anforderungsqualität, GI-Fachgruppentreffen “Requirements Engineering”, Heidelberg, Germany, 2019

Khimchenko, I.; Schulz, P.: Timing Characteristics of Sensor Simulation in an HIL Environment. In: 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS), Metz, France, 2019

Khimchenko, I.; Klarhorst, C.; Schulz, P.: Risc-V Processor with Configurable Pipeline Stage Placement. In: Proceedings of the Dortmund International Research Conference 2019 (C. Wolff and C. Reimann, Eds.) ISBN 978-3-00-063847-3, Dortmund, 2019

Kovalchuk, M.; Sachenko, A.; Wolff, C.: Tailored Approach for Self-Organizing Teams in Software Development. In: Proceedings of the 2nd International Conference on Research and Education in Project Management – REPM 2019 (J. R. Otegi, N. Toledo and I. Taboada, Eds.) Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO), Bilbao, Spain, 2019

Krawczyk, L.; Bazzal, M.; Govindarajan, R.P.; Wolff, C.: An analytical approach for calculating end-to-end response times in autonomous driving applications. In: Workshop on Analysis Tools and Methodologies for Embedded and Real-time Systems (WATERS) of the 31st Euromicro Conference on Real-Time Systems (ECRTS’19), Stuttgart, Germany, 2019

Krawczyk, L.; Bazzal, M.; Govindarajan, R.P.; Wolff, C.: Model-based Timing Analysis and Deployment Optimization for Heterogeneous Multi-Core Systems using Eclipse APP4MC. In: Modeling in Automotive Software Engineering Workshop (MASE'19) on the ACM/IEEE 22nd International Conference on Model Driven Engineering Languages and Systems (MODELS'19), Munich, Germany, 2019

Linnemann, M.; Priebe, K.-P.; Herres, G.; Wolff, C.; Vrabec, J.: Design and test of a multi-coil helical evaporator for a high temperature organic Rankine cycle plant driven by biogas waste heat. In: Energy Conversion and Management 195 (2019), pp. 1402–1414, Elsevier, 2019

Mikhridinova, N.: Competences Management for the Digital Transformation: Framework to Adapt the Usability of the Assessment Tool. In: Proceedings of the Dortmund International Research Conference 2019 (C. Wolff and C. Reimann, Eds.) ISBN 978-3-00-063847-3, Dortmund, 2019

Mikhridinova, N.; Mikhaylova, E.: Business Intelligence as a Backbone of Knowledge System Implementation. In: XVI International Conference in “Project management for the Development of Society”, pp. 38-40, Kiev, Ukraine, 2019

Mikhridinova, N.; Wolff, C., Franke, A.: Competence Management for the digital transformation in German SMEs, Proceedings of the 2nd International Conference on Research and Education in Project Management – REPM 2019 (J. R. Otegi, N. Toledo and I. Taboada, Eds.) Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO), Bilbao, Spain, 2019

Mikhridinova, N., Wolff, C., Hussein, B.: Data Acquisition Framework for Competence Profiles Selection and Project Staffing. In: 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Metz, France, 2019

Rademacher, F.; Sorgalla, J.; Wizenty, P.; Sachweh, S.; Zündorf, A.: Graphical and Textual Model-driven Microservice Development. In: Microservices: Science and Engineering (A. Bucchiarone et al, Eds.), 2019

Rademacher, F.; Sorgalla, J.; Sachweh, S.; Zündorf, A.: A Model-driven Workflow for Distributed Microservice Development. In: 34th Annual ACM/SIGAPP Symposium On Applied Computing, Limassol, Cyprus, 2019

Rademacher, F.; Sorgalla, J.; Sachweh, S.; Zündorf, A.: Viewpoint-specific Model-driven Microservice Development with Interlinked Modeling Languages. In: 13th IEEE International Conference on Service-Oriented System Engineering, San Francisco, USA, 2019

Rademacher, F.; Sachweh, S.; Zündorf, A.: Aspect-oriented Modeling of Technology Heterogeneity in Microservice Architecture . In: IEEE International Conference on Software Architecture, Hamburg, Germany, 2019

Röhrig, C.; Heß, D.: OmniMan: A Mobile Assistive Robot for Intralogistics Applications. In: Engineering Letters, 12, 2019. Vol. 27(4), S. 893-900, 2019

Röhrig, C.; Heß, D.: OmniMan: An Omnidirectional Mobile Manipulator for Human-Robot Collaboration. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2019 (IMECS 2019). Hong Kong. S. 55-60, 2019

Sachweh, S.; Sorgalla, J.; Diepenbrock, A.: Nutzerorientierung durch Nutzerbeteiligung: Entwicklungsbeispiele aus dem Projekt QuartiersNETZ. In: Nutzerorientierte Gesundheitstechnologie (A. Posenau, W. Deiters und S. Sommer, Hrsg.) Bern, Schweiz, 2019

Schabsky, P.; Pelkmann, D.; Vukoman, M.; Wutzkowsky, J.; Böckmann, B.; Sachweh, S.: Participatory Design of an Online Diary Encouraging Self Care. In: 64. Jahrestagung der Deutschen Gesellschaft für Medizinische Informatik, Biometrie und Epidemiologie e.V. (GMDS), Dortmund. Düsseldorf: German Medical Science GMS Publishing House, 2019

Schlösser, C.; Harrer, A.: Exploring the Impact of Gaze Sharing on Collaboration During a Co-Construction Task. In: IEEE 19th International Conference on Advanced Learning Technologies (ICALT), p. 131–133. ISBN: 978-1-7281-3485-7. doi:10.1109/ICALT.2019.00046, 2019

Schulz, P.; Wolff, C.: Cyber Physical Test System - a novel approach in testing for the Embedded Systems Industry. In: IEEE AUTOTESTCON 2019, National Harbor, MD, USA, 2019

Stein, A.; Zillekens, M.; Khan, M.: A Microservice architecture for monitoring, processing and predicting climate data in animal husbandry. In: Online Proceedings of the 2nd International Conference on Microservices (Microservices 2019), Dortmund, Germany, 2019

Temur, L.; Fruhner, D.; Klingebiel, K.: Proactive Demand and Capacity Management for Automotive Logistics Using an Efficient Information Model. In: Proceedings of the 31th European Modeling and Simulation Symposium, September 18-20, Lisbon, Portugal, 2019

Wagenitz, A.; Klingebiel, K.; Toth, M.; Weibels, D.; Geertsema, E.: Integrierte Simulation von Auftragsabwicklungs- und Supply Chain-Prozessen. In: Ablaufsimulation in der Automobilindustrie (G. Mayer, C. Pöge, S. Spieckermann und S. Wenzel, Hrsg.), Springer Verlag, Berlin, 2019

Wiecher, C.; Greenyer, J.; Korte, J.: Test-Driven Scenario Specification of Automotive Software Components, In: ACM/IEEE 22nd International Conference on Model Driven Engineering Languages and Systems (MODELS'19), Modeling in Automotive Software Engineering Workshop (MASE'19), Munich, Germany, 2019

Wizenty, P.: On Viewpoint-specific Microservice Modeling. In: Online Proceedings of the 2nd International Conference on Microservices (Microservices 2019), Dortmund, Germany, 2019.

Wolff, C.; Bengfort, S.; Bauer, J.; Lippmann, T.; Uhe, G.: Digitalisierung und Sektorenkopplung – Entwicklung intelligenter Energiesysteme im ruhrvalley. In: gfw Gas + Energie, Jahrgang 160, 1/2019, S. 50-59, Vulkan Verlag, ISSN 2366-9594, 2019

Wolff, C.; Höttger, R.: Vernetzte Fahrzeuge von morgen: Eclipse Kuksa, ein neues Ecosystem für die Automobilbranche. In: hn21 Journal, 2019

Wolff, C.; Omar, A.; Shildibekov, Y.: How will we build competences for managing the digital transformation? In: 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Metz, France, 2019

Wolff, C.: Organizational DNA of the Master’s Programme EuroMPM. In: 8th Int. Scientific Conf. on Project Management in the Baltic Countries, ISSN 2256-0513, pp. 41-50, Riga, Latvia, 2019

Wolff, C.: Education in Project Management - international, digital and project-based. In: XVI International Conference “Project Management in the Development of Society”, pp. 54-57, Kiev, Ukraine, 2019

Aldaghamin, A.; Sleibi, N.; Reimann, C.: Gamification of Agile Project Management for Software Development Projects, Proceedings of the 1st International Conference on Research and Education in Project Management – REPM 2018, Editors: Jose Ramón Otegi, Nerea Toledo and Ianire Taboada, Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO), ISBN-13: 978-84-697-9972-7, Bilbao, Spain, 2018

Anjum, S.K.; Wolff, C.: Quality Management and Standards Compliance for Agile Development of Automotive Software, Proceedings of the Dortmund International Research Conference 2018, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-061284-8, Dortmund, 2018

Berezhna, A.; Wolff, C.: Key Success Factors in IT Project Management, Proceedings of the Dortmund International Research Conference 2018, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-061284-8, Dortmund, 2018

Bleja J.: Nachhaltige Geschäftsmodelle als Grundlage zur erfolgreichen Etablierung von AAL-Technologien, In: Zeitschrift für Gerontologie und Geriatrie, Band 51, p. 49., 2018

Bleja J., Großmann U., Horster B., Roß A., Löhrke E., Röhrig Ch., Oelker J., Celik A., Hormann R.: IoT-Systems of the AAL-Sector: Application, Business Model, Data Privacy, In: Dependable IoT for Human and Industry: Modeling, Architecting, Implementation (V. Kharchenko, A. Kor and A. Rucinski, Eds.), River Publishers, Aalborg, Denmark, 2018

Bleja J., Großmann U., Langer H.: Szenarienanalyse zur Abschätzung potenzieller Nutzergruppen im Projekt Smart Service Power, In: Active Assisted Living Wissenschaftskongress – Tagungsband, p. 94-95, Karlsruhe, Deutschland, 2018

Bleja J., Großmann U., Langer H.: A Collaborative System Business Model for Ambient Assisted Living Systems, In: Proceedings of the 4th IEEE International Symposium on Wireless Systems within the Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS-SWS 2018), Lviv, Ukraine, 2018

Celik, A.; Hormann, R.; Oelker, J.; Röhrig, C.: Hierarchische Algorithmen in ambienten Systemen, Tagungsband - Active Assisted Living - Wissenschaftskongress 2018, Karlsruhe, Deutschland, 2018

Deitelhoff, F.: Asynchronous gaze sharing: towards a dynamic help system to support learners during program comprehension. In ETRA 2018 ACM Symposium on Eye Tracking Research & Applications,  70:1-70:3, ACM, New York, NY, USA, DOI: https://doi.org/10.1145/3204493.3207421, 2018

Deitelhoff, F.; Harrer, A.: Towards a Dynamic Help System: Support of Learners During Programming Tasks Based Upon Historical Eye-Tracking Data. In 2018 IEEE 18th International Conference on Advanced Learning Technologies (ICALT). IEEE, pp. 77-78, DOI: https://doi.org/10.1109/ICALT.2018.00042, 2018

Diepenbrock, A. ; Sachweh, S.: Ein konzeptionelles Rahmenwerk für die Integration Digitaler Souveränität in Softwarearchitekturen. In: Datenschutz und Datensicherheit - DuD 42 (2018), May, Nr. 5, pp. 281-285. http://dx.doi.org/10.1007/s11623-018-0941-1.  DOI 10.1007/ s11623-018-0941-1. ISSN 1862-2607

Diepenbrock, A.; Sorgalla, J.; Sachweh, S.: Partizipative Technikentwicklung - Methodik und Umsetzungsbeispiele. Fachhochschule Dortmund, https://fh.do/qn-handbuch4. - ISBN 978-3-9820154-8-4, 2018

Dittrich, F.; Wolff, C.: Praxisintegration im Hochschulstudium – das Modell der Fachhochschule (appeared in Chinese), in: Application-Oriented Higher Education Research (AOHER), Vol. 3, Nr. 2, ISSN 2096-2045/CN 34-1326/G4, Hefei, Anhui, P.R. China, 2018

Fruhner, D.; Klingebiel, K.; Pawlikowski, K.; Toth, M.: Impacts of the digitalised car on logistics. In: Proceedings of the 25th Annual EurOMA Conference, Juni 24-26, Budapest, Ungarn, 2018

Grimm, D.; Hirsch, M.; Bab, S.: Supply chain planning: approach for automatic selection of coordination mechanism based on changing relations, Proceedings of the Dortmund International Research Conference 2018, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-061284-8, Dortmund, 2018

Hess, D.; Röhrig, C.: Pose Estimation of Mobile Robots with Quantized Measurements using EFIR Filtering: Experimental comparison with the EKF, Proceedings of the 50th International Symposium on Robotics (ISR 2018), Munich, Germany, 2018

Höttger, R.: Eclipse Kuksa: An open Ecosystem for Connected Vehicles. EclipseCon France 2018: Interview, Research Corner, and Pitch Session Talk, 13–15. June 2018. Available at http://eclip.se/eg 


Höttger, R.: Why Open Source is Driving the Future Connected Vehicle. Mobility in a Globalised World Conference 2018, Mühlheim, Germany, 2018 


Höttger, R.: Eclipse Kuksa - Programmierung von Cloud Services und Fahrzeug Applikationen leicht gemacht. Eclipse DemoCamps 2018, Regensburg, 2018

Höttger, R.; Özcelikörs, M.; Heisig, P.; Krawczyk, L.; Cuadra, P.; Wolff, C.: Combining Eclipse IoT Technologies for a RPI3-Rover along with Eclipse Kuksa, in Combined Proceedings of the Workshops of the German Software Engineering Conference 2018 (SE 2018), pp. 101-106, 2018. Available at: http://ceur-ws.org/Vol-2066/

Höttger, R.; Rawald, T.: Eclipse Kuksa - Developing an Open Source Connected Vehicle Ecosystem. EclipseCon France 2018: Regular talk, 13. June 2018. Available at http://eclip.se/eh 


Höttger, R.; Tessmer, J.: 1st Workshop on Software Engineering for Applied Embedded Real-Time Systems (SEERTS). In Software Engineering und Software Management 2018, volume P-279, pages 43–45. Lecture Notes in Informatics (LNI), Gesellschaft für Informatik e.V. (GI), 5–9. March 2018 



Jahn, U., Wolff, C.; Schulz, P.: Design of an Operator-Controller Based Distributed Robotic System, 24th International Conference on Information and Software Technologies (ICIST 2018), pp. 59-70, Springer CCIS920, Vilnius, Lithuania, 2018

Kamsties, E.; Horkoff, J.; Dalpiaz, F.: Requirements Engineering: Foundation for Software Quality - 24th International Working Conference, REFSQ 2018, Utrecht, The Netherlands, March 19-22, 2018, Proceedings. Lecture Notes in Computer Science 10753, Springer, ISBN 978-3-319-77242-4, 2018

Khimchenko, I.; Schulz, P.: Trends in modeling and simulation of sensors, Proceedings of the Dortmund International Research Conference 2018, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-061284-8, Dortmund, 2018

Kneer, F.: Environment Modeling for Complex, Dynamic and Distributed Systems, Joint Proceedings of REFSQ-2018 Workshops, Doctoral Symposium, Live Studies Track, and Poster Track co-located with the 24th International Conference on Requirements Engineering: Foundation for Software Quality (REFSQ 2018), Utrecht, The Netherlands, 2018

Kneer, F., Kamsties, E.: Anforderungsanalyse für intelligente technische Systeme, Innovationstag Digitalisierung NRW 2018 - ID@NRW 2018, Köln, Germany, 2018

Kneer, F., Kamsties, E., Schmid, K.: Umgebungsmodellierung im Wandel der Zeit - Rückblick und kritischer Ausblick, Softwaretechnik-Trends, Vol. 38, Issue 1, p. 33-34, Kaiserslautern, Germany, 2018

Korotunov, S.; Tabunshchyk, G.; Wolff, C.: Analysis of the Existing Architectures and Modeling Methods of the Cyber-Physical Systems for Smart Grids (appeared in Ukrainian). Electrical & Computer Systems: Theory and Practice (ELTECS 2018), No. 00, ISSN 2221-3805, Odessa, Ukraine, 2018

Korotunov, S.; Tabunshchyk, G.; Wolff, C.: Cyber-Physical Systems Architectures and Modeling Methods Analysis for Smart Grids, IEEE CSIT 2018, pp. 181-186, Lviv, Ukraine, 2018

Kovalchuk, M.; Wolff, C., Sachenko, A.: Managing a Project of Real-Time Face Recognition System Development Using the Agile Methodology, Proceedings of the Dortmund International Research Conference 2018, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-061284-8, Dortmund, 2018

Meyer, D.; Krakau, J.; Fruhner, D.: Comparison of the Product Structure of the Conventional and Digitalised Car. In: Proceedings of the 9th International Research Conference, Juni 29-30, Dortmund, 2018

Mikhieieva, O.; Wolff, C.: Competencies for Managing the Digital Transformation for the Setup of a Master Programme, Proceedings of the 1st International Conference on Research and Education in Project Management – REPM 2018, Editors: Jose Ramón Otegi, Nerea Toledo and Ianire Taboada, Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO), ISBN-13: 978-84-697-9972-7, Bilbao, Spain, 2018

Nuseibah, A.; Saha, T.; Otegi Olaso, J.R.; Wolff, C.: Multi-dimensional Framework for Categorization of Collaborative Research Projects, Proceedings of the 1st International Conference on Research and Education in Project Management – REPM 2018, Editors: Jose Ramón Otegi, Nerea Toledo and Ianire Taboada, Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO), ISBN-13: 978-84-697-9972-7, Bilbao, Spain, 2018

Pawlikowski, K.; Toth, M.; Fruhner, D.; Klingebiel, K.: How electrified car concepts effect automotive logistics. In: Proceedings of the 25th Annual EurOMA Conference, Juni 24-26, Budapest, Ungarn, 2018

Püsche, A.; Bothe, D.; Niemeyer, M.; Sachweh, S.; Pohlmann, N.; Kunold, I.: Concept of Smart Building Cyber-physical Systems Including Tamper Resistant Endpoints. In: Proceedings of the International IEEE Conference and Workshop in Obuda on Electrical and Power Engineering, Budapest, Hungary, 2018

Püsche, A.; Bothe, D.; Sachweh, S.; Pohlmann, N.: Concept of a Life-Cycle Management with Tamper Resistant Distributed Cyber-Physical Systems. In: Smart Energy 2018, Dortmund, 2018

Rademacher, F. ; Sorgalla, J. ; Sachweh, S.: Challenges of Domain-Driven Microservice Design: A Model-Driven Perspective. In: IEEE Software 35 (2018), May, Nr. 3, pp. 36-43. http://dx.doi.org/10.1109/MS.2018.2141028. DOI 10.1109/MS.2018.2141028. ISSN 0740-7459, 2018

Rademacher, F.; Sorgalla, J.; Wizenty, P. N. ; Sachweh, S.; Zündorf, A.: Microservice Architecture and Model-driven Development: Yet Singles, Soon Married (?). In: Proceedings of the Second International Workshop on Microservices: Agile and DevOps Experience (MADE), ACM, 2018

Saha, T; Nuseibah, A.: Analysis of the Relevance of Contextual Factors While Selecting the PM Approach, Proceedings of the 1st International Conference on Research and Education in Project Management – REPM 2018, Editors: Jose Ramón Otegi, Nerea Toledo and Ianire Taboada, Asociación Española de Dirección e Ingeniería de Proyectos (AEIPRO), ISBN-13: 978-84-697-9972-7, Bilbao, Spain, 2018

Schlösser, Ch.; Cedli, L.; Schröder, B.; Kienle, A.: Beyond Gaze Cursor - Exploring Information-Based Gaze Sharing In Chat. In COGAIN ’18: Workshop on Communication by Gaze Interaction, June 14–17, 2018, Warsaw, Poland. ACM, New York, NY, USA, 2018

Schlösser, Ch.: Towards Concise Gaze Sharing. In ETRA 2018 ACM Symposium on Eye Tracking Research and Applications, 78:1-78:3, ACM, New York, NY, USA, DOI https://doi.org/10.1145/3204493.3207416, 2018

Schlösser, Ch.; Harrer, A.; Kienle, A.: Supporting Dyadic Chat Communication with Eye Tracking Based Reading Awareness. In 2018 IEEE 18th International Conference on Advanced Learning Technologies (ICALT). IEEE, pp. 149–151, DOI: https://doi.org/10.1109/ICALT.2018.00042, 2018

Sleibi, N.; Tendyra, P.: Investigating challenges in the communication for interconnecting test-laboratories through the IoT, Proceedings of the Dortmund International Research Conference 2018, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-061284-8, Dortmund, 2018 

Sorgalla, J.; Fleck, J.; Sachweh, S.: ARGI: Augmented Reality for Gesture-based Interaction in Variable Smart Environments. In: Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications - Volume 2: HU-CAPP, INSTICC, SciTePress, pp. 102-107, ISBN 978-989-758-288-2, 2018

Sorgalla, J.; Rademacher, F.; Wizenty, P. N. ; Sachweh, S.; Zündorf, A.: Collaborative Model-Driven Software Engineering and Microservice Architecture: A Perfect Match? In: Proceedings of the Second International Workshop on Microservices: Agile and DevOps Experience (MADE), ACM, 2018

Sorgalla, J.; Wizenty, P. N.; Rademacher, F.; Sachweh, S.; Zündorf, A.: AjiL: Enabling Model-driven Microservice Development. In: Proceedings of the 12th European Conference on Software Architecture: Companion Proceedings. New York, NY, USA : ACM, (ECSA '18). ISBN 978-1-4503-6483-6, 1:1-1:4, 2018

Sorgalla, J.; Wizenty, P. N.; Rademacher, F.; Sachweh, S.: On Collaborative Model-driven Development of Microservices. In: Proceedings of the Third International Workshop on Microservices: Science and Engineering (MSE), 2018

Stampa, M.; Müller, M.; Hess, D.; Röhrig, C.: Semi-automatic Calibration of UWB Range Measurements for an Autonomous Mobile Robot, Proceedings of the 50th International Symposium on Robotics (ISR 2018), Munich, Germany, 2018

Tendyra, P.; Höttger, R.; Kamsties, E.: Over-The-Air Update Compliant Device Management Approaches For Automotive Systems, Proceedings of the Dortmund International Research Conference 2018, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-061284-8, Dortmund, 2018

Wizenty, P. N.; Rademacher, F.; Sorgalla, J.; Sachweh, S.: Design and Implementation of a Remote Care Application Based on Microservice Architecture. In: Proceedings of the Third International Workshop on Microservices: Science and Engineering (MSE), 2018

Wojtok, A.; Bab, S.; Hirsch, M.: Adaptive learning in virtual reality: current state and new approach, Proceedings of the Dortmund International Research Conference 2018, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-061284-8, Dortmund, 2018

Wolff, C.: Internationalität in den Technikwissenschaften - Berufsfeldorientierung in Studieninhalten und –formaten. Internationalisierung der Curricula in den MINT-Fächern (ICM 2018), W. Bertelsmann Verlag (wbv), pp. 99-116, Berlin, 2018

Wolff, C.; Knirr, M.; Priebe, K.-P.; Schulz, P.; Strumberg, J.: A Layered Software Architecture for a Flexible and Smart Organic Rankine Cycle (ORC) Turbine – Solutions and Case Study, Journal of Information Technology and Control, Vol. 47 / No. 2 / 2018, pp. 349-362, Kaunas, Lithuania, 2018

Wolff, C.; Lippmann, T.; Jahn, U.: Holistic Systems Engineering Methodology for Intelligent Energy Systems – with a Case Study from “ruhrvalley”, Chapter 15, in: Dependable IoT for Human and Industry: Modeling, Architecting, Implementation (V. Kharchenko, A. Kor and A. Rucinski, Eds.), River Publishers, Aalborg, Denmark, 2018

Wolff, C.; Mikhieieva, O.; Nuseibah, A.: Competences and the Digital Transformation, Project Management and Engineering Research: AEIPRO 2018, Ayuso Muñoz at al., Lecture Notes in Management and Industrial Engineering, Springer, 2018

Wolff, C.; Nuseibah, A.: Application Enablement Providers in the Internet of Things, 4th IEEE International Symposium on Wireless Systems within the International Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS-SWS 2018), Lviv, Ukraine, 2018 

Bleja, J.; Grossmann, U.; Khess I.: Service-oriented collaborative business models enabling elderly people to stay longer in their homes, Proceedings of the Dortmund International Research Conference 2017, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-058090-1, Dortmund, 2017

Bleja, J.; Grossmann, U.; Khess I.: Ambient Assisted Living – Datenschutzanforderungen und die Erfordernisse serviceorientierter kollaborativer Geschäftsmodelle, In: Smart Energy 2017 (Hrsg. Grossmann U., Kunold I., Engels Ch.), VWH Verlag, 2017

Cuadra, P.; Krawczyk, L.; Höttger, R.; Heisig, P.; Wolff, C.: Automated Scheduling for Tightly-Coupled Embedded Multi-Core Systems Using Hybrid Genetic Algorithms, 23rd International Conference on Information and Software Technologies (ICIST 2017), Springer CCIS, Druskininkai, Lithuania, 2017

Dunets, O.; Wolff, C.; Sachenko, A.: Analysis of admissible limits for changing parameters of project planning, Proceedings of the Dortmund International Research Conference 2017, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-058090-1, Dortmund, 2017

Deitelhoff, F.: Testing the Split-Attention and Multimedia-Effect Guidelines, Proceedings of the Dortmund International Research Conference 2017, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-058090-1, Dortmund, 2017

Diepenbrock, A., Rademacher, F., Sachweh, S.: An Ontology-based Approach for Domain-driven Design of Microservice Architectures, 3rd International Workshop on Big Data, Smart Data and Semantic Technologies @ INFORMATIK 2017, Chemnitz, 2017

Dunets, O.; Wolff, C.; Sachenko, A.; Hladiy, G.; Dobrotvor, I.: Мulti-agent System of IT Project Planning, 9th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Bukarest, Romania, 2017

Fruhner, D.; Pawlikowski, K.; Klingebiel, K.; Toth, M.: Efficient Product Representations for Automotive Logistics. In: 29th European Modeling and Simulation Symposium (EMSS 2017), ISBN: 9781510847651. Barcelona, 2017

Grossmann, U.; Horster, B.; Khess, I.: Collaborative Business Models for AAL-Services based on M2M-Communication, 9th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Bukarest, Romania, 2017

Hoettger, R.; Igel, B.; Spinczyk, O.: On Reducing Busy Waiting in AUTOSAR via  Task-Release-Delta-based Runnable Reordering, Proceedings of the 2017 Design, Automation & Test in Europe, Conference & Exhibition, DATE2017, IEEE Xplore, Lausanne, Switzerland, 2017

Hoettger, R.: APP4MC: Model-Based Embedded Multi-Core Development Made Easy, EclipseCon France 2017: Interview, Research Corner, and Pitch Session Talk, 2017

Hoettger, R.; Mackamul, H.: Eclipse APP4MC - Embedded Multicore Optimization, EclipseCon Europe 2017: Regular Session Talk, 2017

Hoettger, R.; Oezcelikoers, M.: Eclipse APP4MC - Embedded Multicore Optimization, EclipseCon Europe 2017: Automotive conference and IoT playground, 2017

Hoettger, R.; Oezcelikoers, M.; Heisig, P.; Krawczyk, L.; Wolff, C.; Igel, B.: Constrained Mixed-Critical Parallelization for Distributed Heterogeneous Systems, 9th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Bukarest, Romania, 2017

Hoettger, R.; Mackamul, H.; Sailer, A.; Steghoefer, J.-P.: APP4MC: Application Platform Project for Multi- and Many-core Systems, IT - Information Technology. Methods and Applications of Informatics and Information Technology, Volume 59, Issue 5, De Gruyter Oldenbourg, 2017

Khan, M., Sachweh, S., Zuendorf, A.: Towards User-centered Assistance in Smart Environments based on Device Metadata, Special Session on Cyber-Enabled Smart Environment and Healthcare within the IEEE CYBERSCITECH 2017, Orlando, Florida, 2017 

Klingebiel, K.; Motta, M.: Logistik benötigt sämtliche Informationen - Individualität gibt es nicht zum Nulltarif, Orange (2017), S. 45–49, ISSN: 1862-4642, 2017

Kneer, F., Kamsties, E., Schmid, K.: Umgebungsmodellierung im Wandel der Zeit - Rückblick und kritischer Ausblick. Fachgruppentreffen der GI Fachgruppe 2.1.6. Requirements Engineering, November, 23-24, Kaiserslautern, Germany, 2017

Kuhfuß, C.; Schriewer, J.; Ax, T.; Lategahn, J.; Röhrig, C.: Indoor-Navigation mittels Bluetooth Low Energy unter Android, In Schriftenreihe des Fachbereichs Informatik der Fachhochschule Dortmund. Dortmund, Deutschland, June, 2017. Vol. 3, S. 17-26. Monsenstein und Vannerdat, ISBN 978-3-7439-1189-5.

Künemund, F.: Navigationssystem für holonome Fahrerlose Transportfahrzeuge mit multikriterieller Optimierung. VDI-Verlag, Fortschrittsberichte VDI / 10, Band Nr. 858, ISBN 978-3-18-385810-1.

Lauenroth, K., Kamsties, E., Hehlert, O.: Do Words Make a Difference? An Empirical Study on the Impact of Taxonomies on the Classification of Requirements. 25th IEEE Intl. Requirements Engineering Conference, 273-282, Lisbon, Portugal, 2017

Lauenroth, K., Kamsties, E., Pfeiffer, T.: The Impact of Specification Structure on Human Memory Performance - Experiences from a First Experiment. 23nd Intl. Conference on Requirements Engineering: Foundation for Software Quality, 85-91, Essen, Germany, 2017

Maripangui G., J.; Klingebiel, K.: Sales and Operations Planning - An analysis of job offer requirements, Proceedings of the 8th International Research Conference, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-058090-1,  Dortmund, Germany, 2017

Mikhieieva, O.; Nuseibeh, A.; Decelis Grewe, C.; Wolff, C.; Reimann, C.: Implementing a Project Management Approach for Public-Funded Projects in HEIs, 9th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Bukarest, Romania, 2017

Norbisrath, U., Zündorf, A., George, T., Jubeh, R., Kraft, B., Sachweh, S.: Software Stories Guide (Technical Report), Software Engineering Publikationen der Universität Kassel, Kassel, 2017

Nuseibeh, A.; Reimann, C.; Zadnepryanets, M.; Wolff, C.; Otegi, J.R.: Miniumum Viable Product Creation through Adaptive Project Management – An Extended Approach for the Management of Innovation Projects: the Ecochallenge Case, 9th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Bukarest, Romania, 2017

Parlings, M.; Klingebiel, K.: A framework for aligning the supply chain throughout a radical product innovation life cycle, International Journal of Manufacturing Technology and Management (IJMTM), Eds. M. A. Dorgham, 31 (Nr. 1/2/3), S. 37-61. DOI: 10.1504/IJMTM.2017.082011, 2017

Pawlikowski, K.; Fruhner, D.; Klingebiel, K.; Toth, M.: A Motivation and Evaluation of Hierarchical Data Structures for Application in Automotive Demand and Capacity Management. In: International Journal on Advances in Software, vol. 10 nr. 1&2 (2017), ISSN: 1942-2628, USA, 2017

Rademacher, F.: Formalizing Domain-driven Microservice Design with UML's Profile Mechanism (Talk), Microservices 2017, Odense, Denmark, 2017

Rademacher, F., Sachweh, S., Zündorf, A.: Towards a UML Profile for Domain-driven Design of Microservice Architectures, Second Workshop on Microservices: Science and Engineering @ SEFM 2017, Trento, Italy, 2017

Rademacher, F., Sachweh, S., Zündorf, A.: Differences Between Model-driven Development of Service-oriented and Microservice Architecture, First International Workshop on Architecting with MicroServices @ ICSA 2017, Gothenburg, Sweden, 2017

Röhrig, C.; Heß, D.; Künemund, F.: Motion Controller Design for a Mecanum Wheeled Mobile Manipulator, In Proceedings of the IEEE Conference on Control Technology and Applications (CCTA 2017). Kohala Coast, Hawai'i, USA. August 2017.

Röhrig, C.; Heß, D.; Künemund, F.: Pose Estimation of Mobile Robots Using Floor-Installed RFID Tags, In Transactions on Engineering Technologies, IMECS 2016. , S. 1-15. Springer, ISBN 978-981-10-3949-2.

Sardesai, S.; Klingebiel, K.: Performance measurement in global distribution networks - Influences on the service level under uncertainty in CKD networks, Proceedings of the 24th EurOMA Conference, Edinburgh, Scotland, 2017

Schlösser, C.; Friedrich, C.: Utilizing cognitive load in speed reading (RSVP). Insights from an eye tracking study, Proceedings of the Dortmund International Research Conference 2017, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-058090-1, Dortmund, 2017

Schlösser, C.; Friedrich, C.; Cedli,L.; Kienle, A.: „Look who's reading now!” - Evaluating the benefit of interactive eye tracking in chat. In: Abstracts of the 19th European Conference on Eye Movements 2017, Journal of Eye Movement Research, 2017

Sorgalla, J.: AjiL: A Graphical Modeling Language for the Development of Microservice Architectures (Talk), Microservices 2017, Odense, Denmark, 2017

Sorgalla, J., Schabsky, P., Sachweh, S., Grates, M., Heite, E.: Improving Representativeness in Participatory Design Processes with Elderly, CHI '17 Extended Abstracts on Human Factors in Computing Systems, Denver, USA, 2017

Sorgalla, J., Vukoman, M., Grates, M.: Inter- und Transdisziplinarität in der Entwicklung einer digitalen Quartiersplattform, Tagung 2017 „Quartier als Problemraum? Quartier als Perspektive!“, Bochum, Deutschland, 2017

van der Vlugt, D., Kamsties, E., Terfloth, A.: Webbasiert und kollaborativ: Ein Requirements Editor auf Basis von ReqIF. Softwaretechnik-Trends 37(2), 2017

Wizenty, P.: MAGMA: Generating Microservice Infrastructure (Talk), Microservices 2017, Odense, Denmark, 2017

Wizenty, P., Sorgalla, J., Rademacher, F., Sachweh, S.: MAGMA: Build Management-based Generation of Microservice Infrastructures, 11th European Conference on Software Architecture Tool Demonstrations, Canterbury, UK, 2017

Wojtok, A.; Grimm, D.; Hirsch, M.: Multi-Agent System to the rescue! Approach to support production planning, Proceedings of the Dortmund International Research Conference 2017, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-058090-1, Dortmund, 2017

Wolff, C.: Management of an Industry-University-Cluster: ruhrvalley, 6th Int. Scientific Conf. on Project Management in the Baltic Countries, ISSN 2256-0513, pp. 370-380, Riga, Latvia, 2017

Wolff, C.: Managing the Digital Transformation – Digital & Projectized Master Education, Proceedings of the Dortmund International Research Conference 2017, Eds. Carsten Wolff, Christian Reimann, ISBN 978-3-00-058090-1, Dortmund, 2017

Wolff, C.; Mikhieieva, O.; Dechange, A.: European Master in Project Management (EuroMPM) – Joint Approach for Master Education, Proceedings of the 30th IPMA World Congress “Breakthrough Competences for Managing Change”, Astana, Kazakhstan, 2017

Wolff, C.; Nuseibah, A.: A projectized path towards an effective industry-university-cluster: ruhrvalley, Proceedings of the 30th IPMA World Congress “Breakthrough Competences for Managing Change”, Astana, Kazakhstan, 2017

Wolff, C.; Otegi, J.R.; Bushuyev, S.; Sachenko, A.; Ciutene, R.; Hussein, B.; Torvatn, T.A.; Arras, P.; Reimann, C.; Dechange, A.;  Toledo, N.; Nuseibeh, A.; Mikhieieva, O.: Master level education in Project Management – the EuroMPM model, 9th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Bukarest, Romania, 2017

Wolff, C.; Lippmann, T.; Lauschner, U.: Systems Engineering for Metropolitan Energy Systems - ruhrvalley, 9th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Bukarest, Romania, 2017

Wolff, C.; Knirr, M.; Pallwitz, T.; Igci, H.; Priebe, K.-P.; Schulz, P.; Strumberg, J.: Software Architecture for an ORC Turbine – Case Study for an Intelligent Technical System in the Era of the Internet of Things, 23rd International Conference on Information and Software Technologies (ICIST 2017), Springer CCIS, Druskininkai, Lithuania, 2017

Fruhner, D.; Klingebiel, K.; Pawlikowski, K.; Toth, M.; Wagenitz, A.: Complexity Reduction via Hierarchical Product Structures in the Field of Automotive Demand and Capacity Management, Proceedings of the Dortmund International Research Conference 2016, Eds. Peter Reusch, Carsten Wolff, ISBN 978-3-00-055144-4, Dortmund, 2016

Heß, D.; Künemund, F.; Röhrig, C.: Simultaneous Calibration of Odometry and external Sensors of Omnidirectional Automated Guided Vehicles (AGVs), In Proceedings of the 47th International Symposium on Robotics (ISR 2016). Munich, Germany, 2016

Höttger, R.; Lauschner, U.; Närdemann, P.; Heisig, P.; Wolff, C.; Kamsties, E.; Igel, B.: Teaching Distributed and Parallel Systems with APP4MC, International Symposium on Embedded Systems and Trends in Teaching Engineering, Nitra, Slovakia, 2016

Kamsties, E., Kneer, F.: Experimentation with Self-configuring Systems, 22nd Intl. Conference on Requirements Engineering: Foundation for Software Quality, Gothenburg, Sweden, 2016

Kienle, A.; Beißwenger, M.; Cedli, L.; Holmer, T.; Schlieker-Steens, P.; Schlösser, C.: Eyetracking als Ressource zur Unterstützung des Interaktionsmanagements in synchroner Schriftkommunikation. In: Michael Beißwenger (Hrsg.): Empirische Erforschung internetbasierter Kommunikation. Beiträge aus dem DFG-Netzwerk Empirikom, 2016

Kneer, F., Kamsties, E.: A Case Study on Self-configuring Systems in IoT Based on a Model-Driven Prototyping Approach, The 23rd International Conference on Information and Software Technologies, Druskininkai, Lithuania, 2016

Kneer, F., Kamsties, E.: A Framework for Prototyping and Evaluating Self-adaptive Systems – A Research Preview, 22nd Intl. Conference on Requirements Engineering: Foundation for Software Quality, Gothenburg, Sweden, 2016

Kneer, F., Kamsties, E.: Developing of Self-Configuring Systems: A Case Study, Proceedings of the Dortmund International Research Conference 2016, Eds. Peter Reusch, Carsten Wolff, ISBN 978-3-00-055144-4, Dortmund, 2016

Künemund, F.; Heß, D.; Röhrig C.: Energy Efficient Kinodynamic Motion Planning for Holonomic AGVs in Industrial Applications using State Lattices, In Proceedings of the 47th International Symposium on Robotics (ISR 2016). Munich, Germany, 2016.

Kuhfuß, C.; Schriewer, J.; Ax, T.; Lategahn, J.; Röhrig, C.: Android-Applikation zur Indoor-Navigation mittels OpenStreetMap und Bluetooth Low Energy, In Tagungsband 13. GI/ITG KuVS Fachgespräch Ortsbezogene Anwendungen und Dienste. Jena, Deutschland, 2016

Lategahn, J.; Ax, T.; Röhrig, C.: Multi Hypothesis Kalman-Filter for Indoor Pedestrian Navigation Based on Topological Maps, In Proceedings of the IEEE/ION Position Location and Navigation Symposium 2016 (PLANS 2016). Savannah, Georgia, USA, 2016

Lategahn, J.; Ax, T.; Röhrig, C.: Indoor-Personenlokalisierung auf topologischen Gebäudeplänen mit Hilfe eines Multi-Hypothesen Kalman-Filters, In Schriftenreihe des Fachbereichs Informatik der Fachhochschule Dortmund. Dortmund, Deutschland, March, 2016. Vol. 2, S. 9-20. Monsenstein und Vannerdat, 2016

Lauenroth, K., Kamsties, E. (2016): People’s Capabilities are a Blind Spot in RE Research and Practice, 22nd Intl. Conference on Requirements Engineering: Foundation for Software Quality, Gothenburg, Sweden, 2016

Nuseibah A.; Quester, C.; Wolff, C.: Analysis Checklist for Research Project Management: Aspects from European Research, 5th Int. Scientific Conf. on Project Management in the Baltic Countries, ISSN 2256-0513, pp. 226-233, Riga, Latvia, 2016

Parlings, Matthias ; Klingebiel, Katja ; Oschmann, Patrick: An integrated innovation life cycle model for supply chain adaption. In: IFAC-PapersOnLine 49, Nr.2, S.96-101, 2016

Pawlikowski, K.; Fruhner, D.; Klingebiel, K.; Toth, M.; Wagenitz, A.: Benefits of an Integrated Hierarchical Data Structure for Automotive Demand and Capacity Management. In: Proceedings of the Eleventh International Multi-Conference on Computing in the Global Information Technology, ISBN: 978-1-61208-513-5 , ISSN: 2308-4529. Barcelona, 2016

Rademacher, F., Peters, M., Sachweh, S.: Eine Domänenspezifische Sprache für die technologieübergreifende Bereitstellung von Web Services, Software Engineering 2016, Wien, Österreich, 2016

Rademacher, F., Sachweh, S., Rashid Khan, M., Lammert, M.: Towards a Model-based Architecture for Road Traffic Management Systems, The 22nd International Conference on Information and Software Technologies, Druskininkai, Lithuania, 2016

Rademacher, F., Sachweh, S., Sorgalla, J., Heisig, P., Kuller, M., Karaoglan, N., Bauer, J., Kunold, I.: Hochskalierbare Software-Architekturen für die intelligente Verarbeitung von Daten und die flexible Integration virtueller Dienste in Smart Grids, Smart Energy 2016, Dortmund, 2016

Rashid Khan, M., Sachweh, S.: Towards a Recommending System to establish Supply and Care Chains in the Field of Medical and Social Work, Biomedizinische Tagung BMT 2016, Basel, Schweiz, 2016

Reiners, J. M.; Stiller, A.; Schulz, P.: Modulares Test- und Emulationssystem für digitale ASIC-Bausteine, MPC-Workshop, Ravensburg Weingarten, 2016 Röhrig, C., Heß, D.; Künemund, F.: RFID-Based Localization of Mobile Robots Using the Received Signal Strength Indicator of Detected Tags, Engineering Letters., August, 2016. Vol. 24(3), S. 338-346, 2016

Röhrig, C.; Heß, D.; Künemund, F.: Global Localization of Mobile Robots Using Signal Strength Readings from Floor-Installed RFID Transponders, In Proceedings of the International MultiConference of Engineers and Computer Scientists 2016 (IMECS 2016). Hong Kong, 2016

Schrader, R.; Ax, T.; Röhrig, C.; Fühner, C.: Advertising Power Consumption of Bluetooth Low Energy Systems, In Proceedings of the 3st IEEE International Symposium on Wireless Systems within the Conferences on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS-SWS‘2016). Offenburg, Germany, 2016

Schulz, P.; Naroska, E.: Digitale Systeme mit FPGAs entwickeln, Lehrbuch, Elektor Verlag, Aachen, ISBN 978-3-89576-310-6, 2016

Wolff, C.; Knirr, M.; Schulz, P.; Priebe, K.P.; Strumberg, J.; Vrabec, J.: Flexible and Controllable ORC Turbine for Smart Energy Systems, Proceedings of the IEEE EnergyCon 2016, IEEE Xplore, Leuven, Belgium, 2016

Wolff, C.; Wosniak, J.; Hensen, C.: Project Management for Technology Driven Small and Mid Size Enterprises, 5th Int. Scientific Conf. on Project Management in the Baltic Countries, ISSN 2256-0513, pp. 391-397, Riga, Latvia, 2016

Wolff, C.; Telgmann, L.: Systems Engineering for Metropolitan Mobility and Energy – RuhrValley, Proceedings of the Dortmund International Research Conference 2016, Eds. Peter Reusch, Carsten Wolff, ISBN 978-3-00-055144-4, Dortmund, 2016

Wolff, C.: RuhrValley and Ruhr Master School: Two Pillars of a New Cooperative University of Applied Sciences in Engineering, International Symposium on Embedded Systems and Trends in Teaching Engineering, Nitra, Slovakia, 2016

Zadnepryanets, M.; Wolff, C.: Explorative Project Management for Innovative Projects, Proceedings of the Dortmund International Research Conference 2016, Eds. Peter Reusch, Carsten Wolff, ISBN 978-3-00-055144-4, Dortmund, 2016